Yesterday saw me working on a few open questions at once in the library in Bamberg, including pondering a few spinning wheel questions. There's a lot of speculation abounding in regard to the output possible on a hand-spindle, on a Great Wheel and on a modern treadled flyer spinning wheel. There are also quite a few (modern) depictions, descriptions and interpretations of the Great Wheel that do not at all fit in with the image I have in mind of that Wheel: a specialised, highly productive tool for the textile industry, with some very specific caveats and disadvantages, but also with a significantly higher rate of output than the spindle.
All these ponderings are not only in connection with the wheel project - a part of them will also find a little space in the presentation for the conference in Vienna. And all this research is finally solving a few questions I had for a long time.
One is yet unsolved, though. How do I attach the wheel rim to the spokes (or vice versa)? I don't want it all to wobble or fall apart, but I also do not want to risk damage when the wood deforms a little due to changing conditions. Input and speculation (or description of how your Great Wheel, should you have one, keeps its rim and spokes together) is very welcome.